vapouriser
-
September 21, 2013
Opening and filling
Open the container by pressing on the sides and carefully drawing the two halves apart. Then take out the middle section by turning it anti-clockwise. (1) Then insert the funnel tube so that the herbs do not get stuck to the edge and are later burnt off. Hold the vapman vertically when filling it, or place it on a level surface. Fill the finely chopped herbs only as far as the edge of the pan so that the air can later circulate freely. The vaporizer will not function if it is too full. (2) After filling, take the funnel tube out again and remove any excess herbs from the edge of the pan, either with your fingers or with a toothpick, (3)and then replace the middle section again. (4) Should any herbs have remained caught on the edge, remove these with a toothpick or by blowing them away.
Recent Posts
